Install IPKG for Buffalo NAS LS401D

Pre-requisite:

Use putty root to log into your NAS.

Do following commands:

cd /tmp
wget http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/teraprov2-bootstrap_1.2-7_arm.xsh
sh ./teraprov2-bootstrap_1.2-7_arm.xsh

Install nano to edit file.

ipkg install nano

Edit ipkg.conf file to add more source:

  • Edit file
    • nano /opt/etc/ipkg.conf

  • Add line below
    • src cs08q1 http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/

Ctrl + X   Y then Enter to save your change.

After that run

ipkg update

 

Note:

In case you don\’t use array configuration and lost your Optware configuration after reboot, please

1) Reinstall the ipkg

2) mv /mnt/array1/.optware /mnt/disk1

3) adapt /etc/init.d/rc.optware by replacing ‘array1’ with ‘disk1’

4) Reboot. )